[j-nsp] Exporting inet.0 BGP routes into a VRF instance

[Harshit Kumar]

BTW, auto-export is not going to work between inet.0 and a vrf. 
It works between VRFs.

-harshit
 

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Rafal Szarecki (WA/EPO)
> Sent: Wednesday, March 15, 2006 2:02 PM
> To: Mellott, Eric; juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Exporting inet.0 BGP routes into a VRF instance
> 
> There is at least few way to do this.
> 
> One of then can be use of route-target community in global 
> routing table and VRF. Then "auto-export" has to be used. I 
> never try this, but gives hope to simple configuration.
> 
> Other option is use of rib-group xxxx [inet.0 
> vprname.inet.0], and then run BGP on this group xxxx, with policy.
> 
> Rafał Szarecki JNCIE
> 
> skype me <callto://Rafal_Szarecki/> 
> 
>  
> 
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net 
> > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> > Mellott, Eric
> > Sent: Monday, March 13, 2006 8:50 PM
> > To: juniper-nsp at puck.nether.net
> > Subject: [j-nsp] Exporting inet.0 BGP routes into a VRF instance
> > 
> > How can I take BGP routes in the inet.0 table and export them 
> > into a VRF instance to be redistributed?  I do not want all 
> > routes or even all BGP routes, just a couple of specific BGP routes.
> > 
> >  
> > 
> > Thank you,
> > 
> > Eric
> > 
> >  
> > 
> >  
> > 
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net 
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>