[j-nsp] Exporting inet.0 BGP routes into a VRF instance

[Andre Stiphout]

Nice example on inet.0/vrf route exchange:
<http://www.apricot2006.net/slides/tutorial/tuesday/L3VPN_migration.zip>

cheers, andre

On Thu, 16 Mar 2006 21:42:10 +0100, Rick Wilkerson  
<rick.wilkerson at digi-muse.com> wrote:

> Some good information in the feature guide section of the documentation  
> on
> simplifed instance sharing.  Harshit is absolutely correct, however  
> there is
> a solution shown there using a rib table in addition to auto-export.
>
> Rick
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Harshit Kumar
> Sent: Thursday, March 16, 2006 1:57 PM
> To: Rafal Szarecki (WA/EPO); Mellott, Eric; juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Exporting inet.0 BGP routes into a VRF instance
>
> BTW, auto-export is not going to work between inet.0 and a vrf.
> It works between VRFs.
>
> -harshit
>
>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net
>> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Rafal
>> Szarecki (WA/EPO)
>> Sent: Wednesday, March 15, 2006 2:02 PM
>> To: Mellott, Eric; juniper-nsp at puck.nether.net
>> Subject: Re: [j-nsp] Exporting inet.0 BGP routes into a VRF instance
>>
>> There is at least few way to do this.
>>
>> One of then can be use of route-target community in global routing
>> table and VRF. Then "auto-export" has to be used. I never try this,
>> but gives hope to simple configuration.
>>
>> Other option is use of rib-group xxxx [inet.0 vprname.inet.0], and
>> then run BGP on this group xxxx, with policy.
>>
>> Rafał Szarecki JNCIE
>>
>> skype me <callto://Rafal_Szarecki/>
>>
>>
>>
>> > -----Original Message-----
>> > From: juniper-nsp-bounces at puck.nether.net
>> > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Mellott,
>> > Eric
>> > Sent: Monday, March 13, 2006 8:50 PM
>> > To: juniper-nsp at puck.nether.net
>> > Subject: [j-nsp] Exporting inet.0 BGP routes into a VRF instance
>> >
>> > How can I take BGP routes in the inet.0 table and export them into a
>> > VRF instance to be redistributed?  I do not want all routes or even
>> > all BGP routes, just a couple of specific BGP routes.
>> >
>> >
>> >
>> > Thank you,
>> >
>> > Eric
>> >
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>> > http://puck.nether.net/mailman/listinfo/juniper-nsp
>> >
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp



-- 
               Andr[ascii-130] Stiphout - andre at juniper.net

Padlipsky's Law: Implemented Protocols Have Barely Finite Inertia of Rest