[j-nsp] Ascend-??? radius attributes on Juniper ERX

[Nitin Tandon (GR/EIL)]

Hi

Ideally it should work

You can consult the following link to check the radius settings.
http://www.juniper.net/techpubs/software/erx/junose71/swconfig-policy/ht
ml/policy-mgmt-apply5.html


http://www2.juniper.net/kb/viewka.jsp?actionBtn=Search&txtKANumber=15921
&viewMode=view


Also it has some defects in some releases

http://www2.juniper.net/kb/viewka.jsp?actionBtn=Search&txtKANumber=15922
&viewMode=view


//BR
Nitin
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Blaz Zupan
Sent: Tuesday, March 28, 2006 11:13 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Ascend-??? radius attributes on Juniper ERX

Is there a reason why Ascend-Data-Filter would be ignored on a Juniper
ERX BRAS? We do not have direct access to the BRAS (it is own by the
incumbent
telco) but would like to configure filters using Ascend-Data-Filter.
According to the Juniper documentation, the attribute is supported and
there are no special commands to turn it on. The same radius profile
works just fine with a Cisco BRAS, so it must be something specific to
the ERX. Interesting enough, the Ascend-Client-Primary-Dns attribute
does not work either, it should also be supported according to the
documentation. So the problem seems to be specific to the Ascend-*
attributes, other VSAs work just fine (like the
Unisphere-* VSAs, for example Unisphere-Primary-Dns).

And no, we do not want to Unisphere-Ingress-Policy-Name and
Unisphere-Egress-Policy-Name, as we want to control the filters from the
radius server not select an already preconfigured filter on the BRAS.

Any help will be appreciated.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp