[j-nsp] Convert Cisco BGP configs to Juniper (M10i)

[Chen, Qinxue]

Correction: What's the corresponding config on Juniper?

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Chen, Qinxue
Sent: Thursday, March 30, 2006 9:46 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Convert Cisco BGP configs to Juniper (M10i)



Hi,

I'm new to Juniper. I have the following Cisco BGP config:

router bgp xxxx
 no synchronization
 bgp log-neighbor-changes
 redistribute connected route-map MapX
 redistribute static route-map MapX
 neighbor Reflector peer-group
 neighbor Reflector remote-as xxxx
 neighbor Reflector update-source Loopback0
 neighbor Reflector version 4
 neighbor Reflector next-hop-self
 neighbor Reflector send-community
 neighbor Reflector route-map MapY in
 neighbor Reflector maximum-prefix 300000 80 warning-only
 neighbor a.b.c.d peer-group Reflector


What's the corresponding config on Cisco?

Thanks

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp