[j-nsp] Convert Cisco BGP configs to Juniper (M10i)

Mounir Mohamed mounir.mohamed at gmail.com
Thu Mar 30 13:34:19 EST 2006


Dear,

I can't get it, u need cisco BGP config or juniper Config i saw that both
below so could you please clarify

Best Regards,
Mounir Mohamed

On 3/30/06, Chen, Qinxue <QChen at corp.untd.com> wrote:
>
>
> Hi,
>
> I'm new to Juniper. I have the following Cisco BGP config:
>
> router bgp xxxx
> no synchronization
> bgp log-neighbor-changes
> redistribute connected route-map MapX
> redistribute static route-map MapX
> neighbor Reflector peer-group
> neighbor Reflector remote-as xxxx
> neighbor Reflector update-source Loopback0
> neighbor Reflector version 4
> neighbor Reflector next-hop-self
> neighbor Reflector send-community
> neighbor Reflector route-map MapY in
> neighbor Reflector maximum-prefix 300000 80 warning-only
> neighbor a.b.c.d peer-group Reflector
>
>
> What's the corresponding config on Cisco?
>
> Thanks
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>



--
Best Reagrds,
Mounir Mohamed


More information about the juniper-nsp mailing list