[j-nsp] ping mpls l3vpn in an heterogeneous network

Jose Sanchez jasjuniper at gmail.com
Tue May 2 18:39:30 EDT 2006


I installed a lab with 3 routers, 1 J2300 and 2 Cisco 3640, I configure the
routers to create a l3vpn.  After many tests using the ping
routing-instance, I found that the command I must use is ping mpls, but I
try to use this command and there was no reply... I connect a computer to
the J2300 Network and try to ping the Cisco's Network (the l3vpn) and
everything works fine...

Any idea to how to debug or test the behavior of an l3vpn heterogeneous

Thank you

Jose Sanchez

More information about the juniper-nsp mailing list