[j-nsp] FPC-E, broken pin ?!

Edson Cardoso ecardoso at qos.com.br
Tue May 16 14:49:19 EDT 2006


Hi Roman,
I don't have the circuit plan but I had the same problem you have. I guess pin unused depends on PIC type.... Within my pin broked slot,  E3 PICS work no problem but Ethernet PICS doesn't.
 
Regards
 

________________________________

From: juniper-nsp-bounces at puck.nether.net on behalf of Networkbrokers(Roman Kunovic)
Sent: Tue 5/16/2006 3:19 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] FPC-E, broken pin ?!



Hi all,

does any one know where to find a circuit plan from an FPC-E
(710-004677) ? I have a broken pin on one slot and it seems that it is
unused, but I would like to know exactly before implementing the FPC
again and use PICs on this port.

Thanks in advance,

Roman


ITK-Consulting
Roman Kunovic
An der Koberstadt 4a
63225 Langen
Germany

T: +49(0)6103 8036657
F: +49(0)6103 8036658
M: +49(0)163 2593069

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp




More information about the juniper-nsp mailing list