[j-nsp] BGP minimum hold-time
Sean Clarke
sean at clarke-3.demon.nl
Fri May 19 09:52:45 EDT 2006
Hi Kura-san
The hold-time of less than 20 seconds is unsupported because it does
not scale very well .. many unforeseen issues were noticed.
However if you still need it down to 6 seconds, you can do the
following
set protocols bgp minimum-hold-time 6 <- hidden knob in 7.6
set protocols bgp hold-time 6
Really though, you have to understand your network well. If you do,
good luck with it :-) . It must be noted - this configuration is no
longer supported with JTAC - but it's still possible hence the knob is
hidden.
Cheers
Sean
--
Not so long ago you wrote :
kiaj> Hello,
kiaj> Since JUNOS7.6R1 the BGP minimum hold time has been changed from 6 sec.
kiaj> to 20 sec.
kiaj> JUNOS7.6R1 Release Note:
kiaj> Changes in Default Behavior and Syntax
kiaj> The BGP allowed hold time range is from 20 through 65535 seconds.
kiaj> Previously, the range was from 6 through 65535 seconds. [Routing]
kiaj> Does anyone know the ground of this change? Why is the minimum 20 sec.?
kiaj> The reason seems to be well-known, but I could not find any documents.
kiaj> Best regards,
More information about the juniper-nsp
mailing list