[j-nsp] fxp1 and Alarm

[xinyu zeng]

You need to "set chassis alarm management-port disable"( i connot sure
about it as i dont have manual in hand)

On 11/6/06, Brendan Mannella <bmannella at g3tech.net> wrote:
> Hello,
>
>
>
> I have 2 issues.
>
>
>
> The first one is the RED ALARM light on the front of the craft-interface. I
> cannot get it to go off for some reason. I did a " show chassis alarms" and
> it tells me that fxp0 is down. I tried disabling the fxp0 interface, but the
> light still does not go out.
>
>
>
> show chassis alarms
>
> 1 alarms currently active
>
> Alarm time               Class  Description
>
> 2006-11-06 03:23:03 UTC  Major  Host 0 fxp0: Ethernet Link Down
>
>
>
> show chassis craft-interface
>
>
>
> Red alarm:               LED on, relay off
>
> Yellow alarm:            LED off, relay off
>
> Routing Engine OK LED:   On
>
> Routing Engine fail LED: Off
>
>
>
> FPCs     0  1
>
> -------------
>
> Green    *  *
>
> Red      .  .
>
>
>
> LCD screen:
>
>      +--------------------+
>
>      |ibr1.pit01          |
>
>      |1 Alarm active      |
>
>      |R: Host 0 fxp0: Link|
>
>      | D                  |
>
>
>
>
>
>
>
>
> Problem 2 is while trying to get the alarm to go away, I issued a "set
> interface fxp1 disable" not knowing that was actually my PIC card. Once I
> figured that out and re-enabled it, now I have the following in my config
> and would like it to be hidden like it was again. Prior to me disabling the
> fxp1 nothing was in my config referring to fxp1. So how do I hide the below
> like it was.
>
>
>
> }
>
>     fxp1 {
>
>         enable;
>
>         unit 0;
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.13.28/518 - Release Date: 11/4/2006
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Best Regards,
Yours Xinyu.Zeng