[j-nsp] fxp1 and Alarm

[michael.firth at bt.com]

> -----Original Message-----
> 
> Hello, 
> 
>  
> 
> I have 2 issues.
> 
>  
<snip>
> 
> Problem 2 is while trying to get the alarm to go away, I 
> issued a "set interface fxp1 disable" not knowing that was 
> actually my PIC card. Once I figured that out and re-enabled 
> it, now I have the following in my config and would like it 
> to be hidden like it was again. Prior to me disabling the 
> fxp1 nothing was in my config referring to fxp1. So how do I 
> hide the below like it was.
> 
>  
> 
> }
> 
>     fxp1 {
> 
>         enable;
> 
>         unit 0;
> 
> 
I suspect that if you do an 'edit interfaces', 'delete fxp1', it will
remove your custom configuration, and go back to the default (hidden)
configuration.

Probably worth testing on a non production router first though...

Michael