[j-nsp] (no subject)

Scott Morris swm at emanon.com
Mon Nov 6 13:10:32 EST 2006

Your ACS server should be set to RADIUS (Juniper) on the host entries, and
it should all work pretty plain vanilla.  I haven't had any problems anyway.
I'm using Cisco ACS 3.2(2) and a variety of Juniper code levels.



-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
evan.2.williams at bt.com
Sent: Monday, November 06, 2006 12:30 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] (no subject)

Any tips on getting juniper M series to AAA with cisco ACS, had it working
with 'vanilla' TACACS but working in a dual vendor environment a powers have
deigned to go with cisco implementation. 

Evan Williams

juniper-nsp mailing list juniper-nsp at puck.nether.net

More information about the juniper-nsp mailing list