[j-nsp] 802.3ad on M7i

[Jonas Frey]

I am running 802.3ad on 12-FE pics without problems. I am using them in
several M-series without any problems so far.
(As well as usual GE pics on different m-series).

Regards,
Jonas

On Sun, 2006-11-26 at 18:51, Jee Kay wrote:
> On 26/11/06, Markus <universe at truemetal.org> wrote:
> > Thanks to all who replied on- and off-list. I suppose someone in charge
> > should then revise the first sentence at this URL:
> > http://www.juniper.net/techpubs/software/junos/junos81/swconfig81-network-interfaces/html/interfaces-physical-config2.html
> 
> I've no experience with aggregating gig ports, but we've had an number
> of 'issues'* with aggregating FE ports.
> 
> The long and the short of it from Juniper was that they only support
> 802.3ad on the 4 FE port PICs and not the 12 port ones.
> 
> Ras
> 
> * like the physical interface being up, but the unit interfaces being down.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp