[j-nsp] Cisco microflow equivalent on Juniper

[Piotr Marecki]

Kristian, 

take a look at "help topic firewall prefix-action"

regards

Piotr Marecki

----- Original Message ----- 
From: "Kristian Larsson" <kristian at spritelink.se>
To: <juniper-nsp at puck.nether.net>
Sent: Wednesday, October 18, 2006 6:39 PM
Subject: [j-nsp] Cisco microflow equivalent on Juniper


> Hi,
> 
> I'm curious to whether Juniper has something along
> the lines of what Cisco calls user based microflow
> policing, ie setup a policy to limit say ingress
> speed on an interface per IP adress and not have
> to specify a policy for each IP adress
> individually.
> 
> I'm looking at broadband ethernet aggregation,
> 5000-10000 customers and limit each and every
> customers upstream speed to X Mbps.
> Of course the perfect solution would be to limit
> at the edge but unfortunately the switches are
> already in place and won't be replaced for another
> few years so I'm stuck with doing something else.
> 
> Any input is appreciated.
> 
> Regards,
>  kristian.
> 
> -- 
> Kristian Larsson                                   KLL-RIPE
> Network Engineer                      Net at Once [AS35706]
> +46 704 910401      kristian at spritelink.se
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp