[j-nsp] RTP Header Compression

[Dan Rautio]

Hi Diane,

You can do this by using the 'compression' hierarchy on the interface.
Check this out:

http://www.juniper.net/techpubs/software/junos/junos80/swconfig80-servic
es/html/voice-services-config4.html#1026931

Thanks,

Dan

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Peering
> Sent: Thursday, October 19, 2006 2:49 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] RTP Header Compression
> 
> 
> Can t1- ports on the 4-port channelized DS3 IQ PIC support what in
> Cisco-speak is called "frame-relay ip rtp 
> header-compression"?  I looked
> up RTP header compression on the Juniper website and it had a lot of
> references on how to do it on MLPPP or MLFR using the AS PIC, but
> nothing about individual T1s.
> 
> Diane Turley
> Sr. Network Engineer
> Xspedius Communications Co.
> 636-625-7178
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>