[j-nsp] M20 RE serious problem
Mesut Mutlu
kirdjali1978 at yahoo.com
Fri Oct 20 10:49:35 EDT 2006
Hi All,
I need your help as soon as possible.
One of he RE on our company M20 router is not becoming on. Its status after reboot is becoming off . We connected via console port to look at problems which seems to occur. But login and passwords defined before was not utilizable. Message as seem below is occured:
RE1 (ttyd0)
login: test
Oct 20 16:27:09 RE1 login: _pam_init_handlers: could not open /etc/pam.conf
Oct 20 16:27:09 RE1 login: pam_start: failed to initialize handlers
Oct 20 16:27:09 RE1 login: LOGIN_PAM_START: Unable to start PAM session: Critical error - immediate abort
Local Password:Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eventd' dev=76578 inode=74404 uid=0 pid=2698
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pppoed' dev=76554 inode=79988 uid=0 pid=2699
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eccd' dev=76554 inode=76376 uid=0 pid=2700
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/irsd' dev=76554 inode=77684 uid=0 pid=2701
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/dfwd' dev=76554 inode=75892 uid=0 pid=2702
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/ksyncd' dev=76554 inode=78674 uid=0 pid=2703
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/smartd' dev=76554 inode=81200 uid=0 pid=2704
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/kmd' dev=76586 inode=67908 uid=0 pid=2705
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pfed' dev=76554 inode=79630 uid=0 pid=2706
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpc' dev=76554 inode=82164 uid=0 pid=2707
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpd' dev=76554 inode=82290 uid=0 pid=2708
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/snmpd' dev=76554 i
Login incorrect
login: Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/snmpd' dev=76554 inode=81436 uid=0 pid=2710
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/mgd' dev=76578 inode=75000 uid=0 pid=2711
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/craftd' dev=76554 inode=75248 uid=0 pid=2712
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/alarmd' dev=76554 inode=73932 uid=0 pid=2713
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/chassisd' dev=76554 inode=74648 uid=0 pid=2714
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/sbin/dcd' dev=76554 inode=86220 uid=0 pid=2715
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnetd' dev=76554 inode=82044 uid=0 pid=2716
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eventd' dev=76578 inode=74404 uid=0 pid=2770
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eccd' dev=76554 inode=76376 uid=0 pid=2771
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pppoed' dev=76554 inode=79988 uid=0 pid=2772
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/irsd' dev=76554 inode=77684 uid=0 pid=2773
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/dfwd' dev=76554 in
login: teOct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/dfwd' dev=76554 inode=75892 uid=0 pid=2774
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/ksyncd' dev=76554 inode=78674 uid=0 pid=2775
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/mgd' dev=76578 inode=75000 uid=0 pid=2777
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/snmpd' dev=76554 inode=81436 uid=0 pid=2778
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpd' dev=76554 inode=82290 uid=0 pid=2779
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnetd' dev=76554 inode=82044 uid=0 pid=2780
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/sbin/dcd' dev=76554 inode=86220 uid=0 pid=2781
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/chassisd' dev=76554 inode=74648 uid=0 pid=2782
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/alarmd' dev=76554 inode=73932 uid=0 pid=2783
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/craftd' dev=76554 inode=75248 uid=0 pid=2784
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpc' dev=76554 inode=82164 uid=0 pid=2785
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pfed' dev=76554 inst
Oct 20 16:27:21 RE1 login: _pam_init_handlers: could not open /etc/pam.conf
Oct 20 16:27:21 RE1 login: pam_start: failed to initialize handlers
Oct 20 16:27:21 RE1 login: LOGIN_PAM_START: Unable to start PAM session: Critical error - immediate abort
Local Password:
Oct 20 16:27:20 RE1 syslogd: dropping message (console): Resource temporarily unavailable
Then tried procedure for password recovery as it is defined on http://juniper.cluepon.net/index.php/Password_recovery site but unfortunately it also did not work.
I am attaching the logs occured durung password recovery and after restarting RE .
Could you please send me relevant information about this problem and (if there are) possible solutions.
Thanks a lot. Have a nice day.
RE1 (ttyd0)
login:
RE1 (ttyd0)
login:
RE1 (ttyd0)
login: test
Oct 20 16:17:59 RE1 login: _pam_init_handlers: could not open /etc/pam.conf
Oct 20 16:17:59 RE1 login: pam_start: failed to initialize handlers
Oct 20 16:17:59 RE1 login: LOGIN_PAM_START: Unable to start PAM session: Critical error - immediate abort
Local Password:
--- JUNOS 7.5R3.1 built 2006-07-14 17:14:21 UTC
Oct 20 16:18:17 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=2003 pid=2825
Oct 20 16:18:17 RE1 login: LOGIN_SHELL: Failed to execute shell /usr/sbin/cli for user test: Authentication error
login: /usr/sbin/cli: Authentication error
Test_M20_RR
RE1 (ttyd0)
login:
Trying to boot from PCMCIA Flash Card ...
Trying to boot from Compact Flash ...
>> FreeBSD/i386 BOOT
Default: 0:ad(0,a)/boot/loader
boot:
Console: serial port
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS 638kB/2096128kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(builder at uraeus.juniper.net, Fri Jul 14 16:43:27 GMT 2006)
Loading /boot/defaults/loader.conf
/kernel text=0x4530d5 data=0x377dc+0x57522 syms=[0x4+0x52830+0x4+0x60c24]
Hit [Enter] to boot immediately, or space bar for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
ok boot -s
Copyright (c) 1996-2001, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 7.5R3.1 #0: 2006-07-14 17:14:21 UTC
builder at uraeus.juniper.net:/build/uraeus-c/7.5R3.1/obj-i386/sys/compile/JUNIPER
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 601368767 Hz
CPU: Intel Pentium III (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147483648 (2097152K bytes)
sio0: gdb debugging port
avail memory = 2087034880 (2038120K bytes)
Preloaded elf kernel "kernel" at 0xc0698000.
DEVFS: ready for devices
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fdef0
DRAM Data Integrity Mode: ECC Mode with h/w scrubbing
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 15 at device 1.0 on pci0
pcic0: PCI Memory allocated: 0xf8000000
pcic0: TI12XX PCI Config Reg: [pwr save][pci only]
pccard0: <PC Card bus -- legacy version> on pcic0
fxp0: <Intel Embedded 10/100 Ethernet> port 0x1000-0x103f mem 0xfbc00000-0xfbc1ffff,0xfbc20000-0xfbc20fff irq 9 at device 3.0 on pci0
fxp1: <Intel Embedded 10/100 Ethernet> port 0x1040-0x107f mem 0xfbc40000-0xfbc5ffff,0xfbc21000-0xfbc21fff irq 11 at device 4.0 on pci0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x1080-0x108f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
smb0: <Intel 82371AB Compatible SMB controller> mem 0xfbc22000-0xfbc22fff irq 11 at device 15.0 on pci0
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0800-0xc17ff,0xdc000-0xdffff on isa0
ata2 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: EGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1 at port 0x3e8-0x3ef irq 5 on isa0
sio1: type 16550A
sio2 at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
sio3 at port 0x2e8-0x2ef irq 7 on isa0
sio3: type 16550A
fxp0: Ethernet address 00:80:42:13:5e:f9
fxp1: Ethernet address 02:01:00:00:00:05
DEVFS: ready to run
ad0: 245MB <SanDisk SDCFB-256> [980/16/32] at ata0-master PIO4
ad1: DMA limited to UDMA33
ad1: 28615MB <FUJITSU MHT2030AT> [58140/16/63] at ata0-slave UDMA33
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
if_pfe_open: listener socket opened, listening...
Mounted jbase package on /dev/vn0...
System watchdog timer disabled
Enter full pathname of shell or 'recovery' for root password recovery or RETURN for /bin/sh:
NOTE: to go to multi-user operation, exit the single-user shell (with ^D)
# /usr/libexec/ui/recovery-mode
Performing filesystem consistency checks ...
/dev/ad0s1a: 1210 files, 46081 used, 172680 free (88 frags, 21574 blocks, 0.0% fragmentation)
/dev/ad0s1e: 5 files, 13 used, 24272 free (8 frags, 3033 blocks, 0.0% fragmentation)
Performing mount of main filesystems ...
Performing filesystem consistency of secondary filesystems ...
/dev/ad1s1f: 271 files, 227649 used, 25897258 free (706 frags, 3237069 blocks, 0.0% fragmentation)
Performing mount of secondary filesystems ...
Mounted jkernel package on /dev/vn1...
Mounted jpfe package on /dev/vn2...
Mounted jroute package on /dev/vn3...
Mounted jcrypto package on /dev/vn4...
machdep.bootsuccess: 1 -> 1
Performing initialization of management services ...
mgd: error: could not open database: /var/run/db/schema.db: No such file or directory
mgd: error: Database open failed for file '/var/run/db/schema.db': No such file or directory
mgd: error: could not open database schema: /var/run/db/schema.db
mgd: error: could not open database schema
mgd: error: database schema is out of date, rebuilding it
mgd: error: could not open database: /var/run/db/juniper.data: No such file or directory
mgd: error: Database open failed for file '/var/run/db/juniper.data': No such file or directory
mgd: error: Cannot read configuration: Could not open configuration database
Performing checkout of management services ...
NOTE: Once in the CLI, you will need to enter configuration mode using
NOTE: the 'configure' command to make any required changes. For example,
NOTE: to reset the root password, type:
NOTE: configure
NOTE: set system root-authentication plain-text-password
NOTE: (enter the new password when asked)
NOTE: commit
NOTE: exit
NOTE: exit
NOTE: When you exit the CLI, you will be asked if you want to reboot
NOTE: the system
Starting CLI ...
root>
root>
Commands listed on http://juniper.cluepon.net/index.php/Password_recovery was executed. Nothing changed. After reboot everything was same as before as can be seen below.
Trying to boot from PCMCIA Flash Card ...
Trying to boot from Compact Flash ...
onsole: serial port
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS 638kB/2096128kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(builder at uraeus.juniper.net, Fri Jul 14 16:43:27 GMT 2006)
Loading /boot/defaults/loader.conf
/kernel text=0x4530d5 data=0x377dc+0x57522 syms=[0x4+0x52830+0x4+0x60c24]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [kernel]...
Copyright (c) 1996-2001, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 7.5R3.1 #0: 2006-07-14 17:14:21 UTC
builder at uraeus.juniper.net:/build/uraeus-c/7.5R3.1/obj-i386/sys/compile/JUNIPER
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 601368740 Hz
CPU: Intel Pentium III (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147483648 (2097152K bytes)
sio0: gdb debugging port
avail memory = 2087034880 (2038120K bytes)
Preloaded elf kernel "kernel" at 0xc0698000.
DEVFS: ready for devices
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fdef0
DRAM Data Integrity Mode: ECC Mode with h/w scrubbing
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 15 at device 1.0 on pci0
pcic0: PCI Memory allocated: 0xf8000000
pcic0: TI12XX PCI Config Reg: [pwr save][pci only]
pccard0: <PC Card bus -- legacy version> on pcic0
fxp0: <Intel Embedded 10/100 Ethernet> port 0x1000-0x103f mem 0xfbc00000-0xfbc1ffff,0xfbc20000-0xfbc20fff irq 9 at device 3.0 on pci0
fxp1: <Intel Embedded 10/100 Ethernet> port 0x1040-0x107f mem 0xfbc40000-0xfbc5ffff,0xfbc21000-0xfbc21fff irq 11 at device 4.0 on pci0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x1080-0x108f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
smb0: <Intel 82371AB Compatible SMB controller> mem 0xfbc22000-0xfbc22fff irq 11 at device 15.0 on pci0
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0800-0xc17ff,0xdc000-0xdffff on isa0
ata2 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: EGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1 at port 0x3e8-0x3ef irq 5 on isa0
sio1: type 16550A
sio2 at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
sio3 at port 0x2e8-0x2ef irq 7 on isa0
sio3: type 16550A
fxp0: Ethernet address 00:80:42:13:5e:f9
fxp1: Ethernet address 02:01:00:00:00:05
DEVFS: ready to run
ad0: 245MB <SanDisk SDCFB-256> [980/16/32] at ata0-master PIO4
ad1: DMA limited to UDMA33
ad1: 28615MB <FUJITSU MHT2030AT> [58140/16/63] at ata0-slave UDMA33
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
if_pfe_open: listener socket opened, listening...
Mounted jbase package on /dev/vn0...
Verified manifest signed by PackageProduction_7_5_0
Verified jboot signed by PackageProduction_7_5_0
Mounted jkernel package on /dev/vn1...
Mounted jpfe package on /dev/vn2...
Mounted jdocs package on /dev/vn3...
Mounted jroute package on /dev/vn4...
Mounted jcrypto package on /dev/vn5...
Mounted jpfe-common package on /dev/vn6...
swapon: adding /dev/ad1s1b as swap device
Automatic reboot in progress...
/dev/ad0s1a: 1210 files, 46081 used, 172680 free /dev/ad0s1e: 5 files, 13 used, 24272 free (88 frags, 21574 blocks, 0.0% fragmentation)
(8 frags, 3033 blocks, 0.0% fragmentation)
(88 frags, 21574 blocks, 0.0% fragmentation)
/dev/ad1s1f: 264 files, 232401 used, 25892506 free (722 frags, 3236473 blocks, 0.0% fragmentation)
tunefs: soft updates set
veriexec: no signatures for device. file='/usr/sbin/rpdc' dev=76578 inode=75892 uid=0 pid=2513
Creating initialv configuration..e.riexec: no signatures for device. file='/usr/sbin/mgd' dev=76578 inode=75000 uid=0 pid=2517
watchdog: failed to exec command: /usr/sbin/mgd
Warning: Commit failed, activating partial configuration.
Warning: Edit the router configuration to fix these errors.
cp: /var/run/db/juniper.db: No such file or directory
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Setup PC-CARD: memory pccardd.
Doing initial network setup:.
vInitial interfacee configuration:r
iexec: no signatures for device. file='/usr/sbin/irsd' dev=76554 inode=77684 uid=0 pid=2530
/packages/mnt/jbvase/etc/rc: /usre/sbin/irsd: errorr 80
iexec: no signatures for device. file='/usr/sbin/chassisd' dev=76554 inode=74648 uid=0 pid=2531
/packages/mnt/jbvase/etc/rc: chasesisd: error 80
riexec: no signatures for device. file='/sbin/dcd' dev=76554 inode=86220 uid=0 pid=2532
/packages/mnt/jbase/etc/rc: dcd: error 80
additional daemons:.
checking for core dump...
savecore: Reboot reason(s): 0x4: reset-button reset
Oct 20 16:27:02 RE1 savecore: Reboot reason(s): 0x4: reset-button reset
Additional routing options: ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.i386 initialization: microcode kld.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Fri Oct 20 16:27:04 EEST 2006
O O Test_M20_RR
RE1 (ttyd0)
login:
RE1 (ttyd0)
login:
RE1 (ttyd0)
login: test
Oct 20 16:27:09 RE1 login: _pam_init_handlers: could not open /etc/pam.conf
Oct 20 16:27:09 RE1 login: pam_start: failed to initialize handlers
Oct 20 16:27:09 RE1 login: LOGIN_PAM_START: Unable to start PAM session: Critical error - immediate abort
Local Password:Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eventd' dev=76578 inode=74404 uid=0 pid=2698
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pppoed' dev=76554 inode=79988 uid=0 pid=2699
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eccd' dev=76554 inode=76376 uid=0 pid=2700
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/irsd' dev=76554 inode=77684 uid=0 pid=2701
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/dfwd' dev=76554 inode=75892 uid=0 pid=2702
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/ksyncd' dev=76554 inode=78674 uid=0 pid=2703
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/smartd' dev=76554 inode=81200 uid=0 pid=2704
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/kmd' dev=76586 inode=67908 uid=0 pid=2705
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pfed' dev=76554 inode=79630 uid=0 pid=2706
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpc' dev=76554 inode=82164 uid=0 pid=2707
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpd' dev=76554 inode=82290 uid=0 pid=2708
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/snmpd' dev=76554 i
Login incorrect
login: Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/snmpd' dev=76554 inode=81436 uid=0 pid=2710
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/mgd' dev=76578 inode=75000 uid=0 pid=2711
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/craftd' dev=76554 inode=75248 uid=0 pid=2712
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/alarmd' dev=76554 inode=73932 uid=0 pid=2713
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/chassisd' dev=76554 inode=74648 uid=0 pid=2714
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/sbin/dcd' dev=76554 inode=86220 uid=0 pid=2715
Oct 20 16:27:10 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnetd' dev=76554 inode=82044 uid=0 pid=2716
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eventd' dev=76578 inode=74404 uid=0 pid=2770
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eccd' dev=76554 inode=76376 uid=0 pid=2771
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pppoed' dev=76554 inode=79988 uid=0 pid=2772
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/irsd' dev=76554 inode=77684 uid=0 pid=2773
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/dfwd' dev=76554 in
login: teOct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/dfwd' dev=76554 inode=75892 uid=0 pid=2774
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/ksyncd' dev=76554 inode=78674 uid=0 pid=2775
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/mgd' dev=76578 inode=75000 uid=0 pid=2777
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/snmpd' dev=76554 inode=81436 uid=0 pid=2778
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpd' dev=76554 inode=82290 uid=0 pid=2779
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnetd' dev=76554 inode=82044 uid=0 pid=2780
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/sbin/dcd' dev=76554 inode=86220 uid=0 pid=2781
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/chassisd' dev=76554 inode=74648 uid=0 pid=2782
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/alarmd' dev=76554 inode=73932 uid=0 pid=2783
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/craftd' dev=76554 inode=75248 uid=0 pid=2784
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpc' dev=76554 inode=82164 uid=0 pid=2785
Oct 20 16:27:15 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pfed' dev=76554 inst
Oct 20 16:27:21 RE1 login: _pam_init_handlers: could not open /etc/pam.conf
Oct 20 16:27:21 RE1 login: pam_start: failed to initialize handlers
Oct 20 16:27:21 RE1 login: LOGIN_PAM_START: Unable to start PAM session: Critical error - immediate abort
Local Password:
Oct 20 16:27:20 RE1 syslogd: dropping message (console): Resource temporarily unavailable
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eventd' dev=76578 inode=74404 uid=0 pid=2789
Oct 20 16:27:20 RE1 syslogd: dropping message (console): Resource temporarily unavailable
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/pppoed' dev=76554 inode=79988 uid=0 pid=2790
Oct 20 16:27:20 RE1 syslogd: dropping message (console): Resource temporarily unavailable
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/eccd' dev=76554 inode=76376 uid=0 pid=2791
Oct 20 16:27:20 RE1 init: event-processing is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2808
Oct 20 16:27:20 RE1 init: ecc-error-logging is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2809
Oct 20 16:27:20 RE1 init: pppoe is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2810
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/irsd' dev=76554 inode=77684 uid=0 pid=2792
Oct 20 16:27:20 RE1 init: internal-routing-service is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/dfwd' dev=76554 inOct 20 16:27:20 RE1 init: firewall is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2811
Oct 20 16:27:20 RE1 init: kernel-replication is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2812
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/snmpd' dev=76554 inode=81436 uid=0 pid=2796
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/mgd' dev=76578 inode=75000 uid=0 pid=2797
Oct 20 16:27:20 RE1 init: inet-process is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2813
Oct 20 16:27:20 RE1 init: management is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 ino
--- JUNOS 7.5R3.1 built 2006-07-14 17:14:21 UTC
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2815
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpd' dev=76554 inode=82290 uid=0 pid=2798
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/tnp.sntpc' dev=76554 inode=82164 uid=0 pid=2799
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/craftd' dev=76554 inode=75248 uid=0 pid=2800
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/alarmd' dev=76554 inode=73932 uid=0 pid=2801
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/chassisd' dev=76554 inode=74648 uid=0 pid=2802
Oct 20 16:27:20 RE1 init: sntp is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2816
Oct 20 16:27:20 RE1 init: chassis-control is thrashing, not restarted
Oct 20 16:27:20 RE1 /kernel: veriexec: no signatures for device. file='/usr/sbin/cli' dev=76578 inode=74288 uid=0 pid=2817
Oct 20 16:27:20 RE1 init: alarm-control is thrashing, not restartedlogin: /usr/sbin/cli: Authentication error
Test_M20_RR
RE1 (ttyd0)
login:
More information about the juniper-nsp
mailing list