[j-nsp] GRE Tunnel - No Transit Traffic

Harshit Kumar harshit at juniper.net
Wed Sep 6 13:49:57 EDT 2006


Eric,
        Can you provide your config ? Hope you are using
The gr-x/y/z interface created by a tunnel or an asp pic and not
The "gre" interface.

Thx
Harshit
 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Mellott, Eric
Sent: Wednesday, September 06, 2006 8:44 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] GRE Tunnel - No Transit Traffic

Having problems with a couple M10i's running 7.3R3.6 with tunnel
pics...I have configured GRE tunnels between the routers and am able to
get routing protocols to work over the tunnels.  However, I am not able
to get transit traffic to traverse the tunnels in either direction.  The
routes to the remote network are via the tunnel, but can't get the
traffic to go.  When monitoring both routers' interface statistics, I
can see input and output packets increase along with remote output
packets, however; I can never see remote input packets increase from
either end.   Could there be a compatibility issue with the tunnel pic
and the version of code I am running?  Anybody see this symptom before?

 

Thank you,



Eric Mellott

 

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list