[j-nsp] join links

[Jonas Frey]

Hello,

M7i with JunosE? :)

As far as i know, you will need a multilink pic to do this.
http://www.juniper.net/techpubs/software/junos/junos76/swconfig76-services/html/link-services-config.html

Regards,
Jonas


On Wed, 2006-09-27 at 15:50, Erdem Sener wrote:
> Hello,
> 
>  You could configure both your links with MLFR. Please refer to the
> documentation for further information:
> 
> http://www.juniper.net/techpubs/software/erx/junose72/swconfig-link/html/mlfr-config.html
> 
> HTH
> 
> On 9/27/06, Erol KAHRAMAN <erol.kahraman at gmail.com> wrote:
> > hi,
> >
> > i have a m7i box with 10 che1 ports. My internet connection is trough 2
> > Mbit/s FR link. Now i am planning to increase my internet bandwith. If i buy
> > second 2 MBit/s FR link, can i join these two links to behave as a 4 MBit/s
> > link. May be this is not true solution of my problem, so i am open for
> > advises.
> > thx
> >
> > --
> > Erol KAHRAMAN
> > System Network Administrator
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >