[j-nsp] join links

Erdem Sener erdems at gmail.com
Wed Sep 27 10:22:39 EDT 2006


sorry my bad, pasted the wrong link :)



On 9/27/06, Jonas Frey <jf at probe-networks.de> wrote:
> Hello,
>
> M7i with JunosE? :)
>
> As far as i know, you will need a multilink pic to do this.
> http://www.juniper.net/techpubs/software/junos/junos76/swconfig76-services/html/link-services-config.html
>
> Regards,
> Jonas
>
>
> On Wed, 2006-09-27 at 15:50, Erdem Sener wrote:
> > Hello,
> >
> >  You could configure both your links with MLFR. Please refer to the
> > documentation for further information:
> >
> > http://www.juniper.net/techpubs/software/erx/junose72/swconfig-link/html/mlfr-config.html
> >
> > HTH
> >
> > On 9/27/06, Erol KAHRAMAN <erol.kahraman at gmail.com> wrote:
> > > hi,
> > >
> > > i have a m7i box with 10 che1 ports. My internet connection is trough 2
> > > Mbit/s FR link. Now i am planning to increase my internet bandwith. If i buy
> > > second 2 MBit/s FR link, can i join these two links to behave as a 4 MBit/s
> > > link. May be this is not true solution of my problem, so i am open for
> > > advises.
> > > thx
> > >
> > > --
> > > Erol KAHRAMAN
> > > System Network Administrator
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >
>
>
>


-- 
Erdem


More information about the juniper-nsp mailing list