[j-nsp] juniper - cisco l2circuit problem

[Yevgeniy Voloshin]

Chris,

I think on 7600/6500 you want use vlan-based EoMPLS, so xconnect must
be configuresd on GigabitEthernet1/2 subinterface something like that
interface GigabitEthernet1/2.100
 encapsulation dot1Q 100
 xconnect X.X.Y.100 803 encapsulation mpls
 no shut
 
Useful CCO link:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_configuration_guide_chapter09186a0080699477.html

Confguration xconnect under interface Vlan100 works only on 3750ME!


Also be sure that you add lo0.0(I mean X.X.Y.100) under protocols ldp
section on juniper:
set protocols ldp interface lo0.0




---
HTH,
Yev.