[j-nsp] VPLS with 2 interfaces on the same router

[Yevgeniy Voloshin]

my question is - that is wrong in my configuration, so VPLS not work(I can't
ping CE1 <---> CE2).
I use cisco routers like CE, and see with 'show cdp neighbors' myself - on
CE1 I see CE1 like neighbor and also on CE2 I see CE2.
I do not configure any in BGP section, or
some other section except that I write before.
Also may be I must configure some input-vlan-map and output-vlan-map on my
subinterfaces to join its in the same VPLS instance?


As I write before I use 1x G/E IQ on my m7i:
show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis A1674 M7i
Midplane REV 04 710-008761 CS5290 M7i Midplane
Power Supply 0 Rev 02 740-008985 6081743 DC Power Supply
Power Supply 1 Rev 02 740-008985 6081742 DC Power Supply
Routing Engine REV 10 740-009459 1000627040 RE-5.0
CFEB REV 08 750-010464 CN9963 Internet Processor II
FPC 0 E-FPC
PIC 0 REV 09 750-003873 CP9902 4x E1, RJ48
PIC 1 REV 09 750-007641 CR6244 1x G/E IQ, 1000 BASE
Xcvr 0 NON-JNPR PT6406943 SFP-LX
FPC 1 E-FPC
PIC 2 REV 07 750-009487 CM8139 ASP - Integrated (Layer-2-3)
PIC 3 REV 08 750-009099 CS2332 1x G/E, 1000 BASE


Can you provide some real working examples?