[j-nsp] BGP Origin Issue
Ebben Aries
earies at uci.net
Thu Apr 19 15:58:38 EDT 2007
When you redistribute into BGP, the routes will show as imcomplete. I believe
that is cisco default behavior on redistribution. To circumvent the issue,
you can create a route-map w/ a 'set origin' on outbound announcements.
On Thursday 19 April 2007 11:22 am, Borchers, Mark M. wrote:
> We have a downstream BGP site announcing 19 prefixes from a Cisco router.
> Eleven of the prefixes were configured with network statements in his BGP
> config. The remaining nine were statically null-routed and being
> redistributed into BGP. Thus, those nine appeared to us on an M20 as
> origin incomplete. None were advertised to other peers.
>
> Just wondering if this is working as designed or if we have a Juniper-Cisco
> BGP interoperability issue. We are running Junos 7.6R2.6. I am aware of
> the role of origin in BGP path selection, but these examples include routes
> that are not being announced via any other path.
>
>
> Mark Borchers
>
>
>
>
> NOTICE: This electronic mail transmission may contain confidential
> information and is intended only for the person(s) named. Any use, copying
> or disclosure by any other person is strictly prohibited. If you have
> received this transmission in error, please notify the sender via e-mail.
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list