[j-nsp] VPLS tunnel LSP establishment

[GAY Samuel]

I suppose that you use RSVP protocol to etablish the LSP.
You can use the interface address or the router ID. I advise you to use 
router ID for a reason of scalability.

Regards,
Samuel

Monika M a écrit :
> site1---PE1 ----- P1-----------P2-----------(x)-PE2----site2
>
> I have BGP peering between PE1-PE2 for having L2VPN service.
> L2VPN configuration steps mandate configuration of tunnel LSP establishment.
> Should I have an LSP for the PE2's interface address x or PE2's router ID.
>
> TIA
> Monika
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>