[j-nsp] M10i can't commit configuration

Eric Van Tol eric at atlantech.net
Mon Aug 6 14:59:29 EDT 2007


Nevermind - problem resolved.  Seems to be a possible bug or simply an
undocumented syntax change between 8.2R1.x and 8.2R2.x.

Thanks to those who have responded so far.

-evt

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Eric Van Tol
> Sent: Monday, August 06, 2007 10:04 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] M10i can't commit configuration
> 
> Hi all,
> I'm getting the following error when trying to commit a 
> configuration on
> a newly installed M10i:
> 
> cer1.bltmmdch-re0# commit and-quit
> re0:
> error: Check-out failed for Routing protocols process (/usr/sbin/rpd)
> without details
> error: configuration check-out failed
> 
> We've restarted RPD and tried a 'commit full', but nothing works.  I'd
> prefer not to have to restart the entire router, but will if 
> necessary.
> Any idea what this is all about?
> 
> Thanks,
> evt
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 


More information about the juniper-nsp mailing list