[j-nsp] CFEB error

sthaug at nethelp.no sthaug at nethelp.no
Mon Aug 20 15:39:17 EDT 2007


>    I've been getting a lot of CFEB related errors on my M7i logs, as below: 
> 
> *****************************************************************
> [date & time]  [hostname] cfeb hge_sffp_i2c_set_read_addr timeout waiting SFFP 
> read addr config
> [date & time]  [hostname] cfeb HGE(0/0) link 0: error set SFFP I2C read addr 
> 0x0161
> [date & time]  [hostname] cfeb SFP 2: in sfp_read_range, failed to read SFP 
> DIAGNOSTICS address 97
> 
> 
> [date & time]  [hostname] cfeb QGE(1/3): timeout waiting SFFP read cmd, 
> qge_sfp_id_read
> [date & time]  [hostname] cfeb SFP 1: in sfp_read_range, failed to read SFP 
> DIAGNOSTICS address 101
> [date & time]  [hostname] cfeb hge_sfp_id_read timeout waiting SFFP read cmd
> [date & time]  [hostname] cfeb SFP 2: in sfp_read_range, failed to read SFP 
> DIAGNOSTICS address 97
> 
> ***********************************************************************
> 
> This started occuring after JUNOS upgrade to 8.2. Are there any specific 
> issues/bug attached to this software version?

We have seen the same messages after upgrading. As far as I understand
it is a known cosmetic defect, with no impact other than looking ugly
in the logs.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no


More information about the juniper-nsp mailing list