[j-nsp] CFEB error

[Kanagaraj Krishna]

It is messing up the logs. Any ways to rectify this defect?

/Kana
  ----- Original Message ----- 
  From: sthaug at nethelp.no 
  To: kanagaraj at aims.com.my 
  Cc: juniper-nsp at puck.nether.net 
  Sent: Tuesday, August 21, 2007 3:39 AM
  Subject: Re: [j-nsp] CFEB error


  >    I've been getting a lot of CFEB related errors on my M7i logs, as below: 
  > 
  > *****************************************************************
  > [date & time]  [hostname] cfeb hge_sffp_i2c_set_read_addr timeout waiting SFFP 
  > read addr config
  > [date & time]  [hostname] cfeb HGE(0/0) link 0: error set SFFP I2C read addr 
  > 0x0161
  > [date & time]  [hostname] cfeb SFP 2: in sfp_read_range, failed to read SFP 
  > DIAGNOSTICS address 97
  > 
  > 
  > [date & time]  [hostname] cfeb QGE(1/3): timeout waiting SFFP read cmd, 
  > qge_sfp_id_read
  > [date & time]  [hostname] cfeb SFP 1: in sfp_read_range, failed to read SFP 
  > DIAGNOSTICS address 101
  > [date & time]  [hostname] cfeb hge_sfp_id_read timeout waiting SFFP read cmd
  > [date & time]  [hostname] cfeb SFP 2: in sfp_read_range, failed to read SFP 
  > DIAGNOSTICS address 97
  > 
  > ***********************************************************************
  > 
  > This started occuring after JUNOS upgrade to 8.2. Are there any specific 
  > issues/bug attached to this software version?

  We have seen the same messages after upgrading. As far as I understand
  it is a known cosmetic defect, with no impact other than looking ugly
  in the logs.

  Steinar Haug, Nethelp consulting, sthaug at nethelp.no