[j-nsp] CFEB error

[Peder Bach]

It appears that you are running into
PR80393 which appears to be cosmetic in nature.

There will be a fix in 8.4 for this.

-Peder


On 8/23/07, Kanagaraj Krishna <kanagaraj at aims.com.my> wrote:
> It is messing up the logs. Any ways to rectify this defect?
>
> /Kana
>  ----- Original Message -----
>  From: sthaug at nethelp.no
>  To: kanagaraj at aims.com.my
>  Cc: juniper-nsp at puck.nether.net
>  Sent: Tuesday, August 21, 2007 3:39 AM
>  Subject: Re: [j-nsp] CFEB error
>
>
>  >    I've been getting a lot of CFEB related errors on my M7i logs, as below:
>  >
>  > *****************************************************************
>  > [date & time]  [hostname] cfeb hge_sffp_i2c_set_read_addr timeout waiting SFFP
>  > read addr config
>  > [date & time]  [hostname] cfeb HGE(0/0) link 0: error set SFFP I2C read addr
>  > 0x0161
>  > [date & time]  [hostname] cfeb SFP 2: in sfp_read_range, failed to read SFP
>  > DIAGNOSTICS address 97
>  >
>  >
>  > [date & time]  [hostname] cfeb QGE(1/3): timeout waiting SFFP read cmd,
>  > qge_sfp_id_read
>  > [date & time]  [hostname] cfeb SFP 1: in sfp_read_range, failed to read SFP
>  > DIAGNOSTICS address 101
>  > [date & time]  [hostname] cfeb hge_sfp_id_read timeout waiting SFFP read cmd
>  > [date & time]  [hostname] cfeb SFP 2: in sfp_read_range, failed to read SFP
>  > DIAGNOSTICS address 97
>  >
>  > ***********************************************************************
>  >
>  > This started occuring after JUNOS upgrade to 8.2. Are there any specific
>  > issues/bug attached to this software version?
>
>  We have seen the same messages after upgrading. As far as I understand
>  it is a known cosmetic defect, with no impact other than looking ugly
>  in the logs.
>
>  Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>