[j-nsp] T1 master/slave timing

[Zhao, Wenmei (Sarah)]

Hi All,
 
I want to have master/slave timing in the Juniper router.
The external clocking source is the master. The card
is a channelized OC-3. 
 
Can that be done by setting clocking to external at the 
OC-3 level and internal at the T1 level? Does this
institue a master/slave timing, or will the T1 setting
take precedence over the OC-3 level and it becomes
internal clocking?
 
Thanks,
Sarah Zhao 
http://www.geocities.com/redoakland/
<http://www.geocities.com/redoakland/>