[j-nsp] GE/10GE link-mode config on M/T-series has no effect

[Richard A Steenbergen]

On Tue, Dec 11, 2007 at 08:21:53AM -0500, Chuck Anderson wrote:
> It is a requirement of the GigE standard to do autonegotiation.  
> Turning it off would be a violation of the standard.  Besides, when 
> was the last time you saw a GigE PHY that supported Half-Duplex?  
> Autonegotiation on GigE is more about flow-control settings than 
> duplex settings.  I assume the situation with 10GE is similar.

Re: GigE, you are very confused. The above is only true with 10GE.

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)