[j-nsp] MLPPP configuration check-out failed on LS_PIC/

[xinyu zeng]

You need to remove your interface level 'encapsulation ppp'

On 12/18/07, Nick Kraal <nick at arc.net.my> wrote:
>
> Dear Eric,
>
> Thanks for your feedback. It does not look like there are any
> 'apply-groups' configurations on the interface.
>
> show configuration interfaces e1-0/2/7 | display inheritance
> description "PPP E1#1 interface";
> clocking internal;
> encapsulation ppp;
> e1-options {
>      framing unframed;
>      fcs 16;
> }
>
>
> Regards,
>
> -nick/
>
>
>
> Eric Van Tol wrote:
> >> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Nick Kraal
> >> Sent: Monday, December 17, 2007 5:56 AM
> >>
> >> ----------------------------
> >> [edit interfaces e1-0/2/7 unit 0 family]
> >> No other family allowed when family mlppp or mlfr is configured
> >> Error: configuration check-out failed
> >> ----------------------------
> >
> > Do you happen to have any 'apply-groups' configured on all E1 interfaces
> > (show configuration interfaces e1-0/2/7 | display inheritance)?  If so,
> > you may want to use the 'apply-groups-except' option on this particular
> > E1.
> >
> > -evt
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Best Regards,
Yours Zeng, Xinyu