[j-nsp] HA - SSG-550 (A/P)
Marion, David
David.Marion at bridgew.edu
Fri Dec 21 09:20:25 EST 2007
Hi Vincent,
You can try a "get nsrp vsd-group" this will show you the devices in the
VSD group(s). To check the RTOs (runtime objects) type "get nsrp
rto-mirror". I hope this helps.
Best,
Dave Marion
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Vincent De
Keyzer
Sent: Friday, December 21, 2007 7:32 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] HA - SSG-550 (A/P)
Hi,
I am setting up a HA pair of SSG-550 (active/passive).
I can see that they are synchronized, because config changes made on one
are replicated to the other; but is what is the command to check that
they are synchronized (without changing the config)?
Vincent
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list