[j-nsp] HA - SSG-550 (A/P)

Bradford Darr bdarr at juniper.net
Fri Dec 21 09:30:10 EST 2007


Try the following:

exec nsrp sync global-config check-sum

This will tell you whether the devices are in sync.


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Vincent De
Keyzer
Sent: Friday, December 21, 2007 6:32 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] HA - SSG-550 (A/P)

Hi,

I am setting up a HA pair of SSG-550 (active/passive).

I can see that they are synchronized, because config changes made on one

are replicated to the other; but is what is the command to check that 
they are synchronized (without changing the config)?

Vincent
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list