[j-nsp] New to Juniper (re-try)

[Jonathan Brashear]

Show | compare

Network Engineer
> 214-981-1954 (office) 
> 214-868-8567 (cell)
> jbrashear at hq.speakeasy.net 
http://www.speakeasy.net
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Wayne
Lansdowne
Sent: Thursday, December 27, 2007 1:06 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] New to Juniper (re-try)

Hello all, 

I apologize..my first posting attempt did not come through correctly.

I'm new to the Juniper routers having previously worked with Riverstone.
Within the Riverstone CLI I had the ability to preview all the pending
(non-committed) changes via a 'scratchpad' command.  Does the Juniper
have a similar feature?  I'm unable to find anything thus far to display
a list of yet to be committed changes.  Thus far I'm simply doing a
'commit check' then 'commit' and hoping I had remembered to implement
all my changes.  I'm basically looking for a way to review all the
pending changes before making that commit. 

I've done some searching and have come up empty.  Is there a CLI command
I'm missing?

Regards, 

Wayne



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp