[j-nsp] New to Juniper (re-try)
Wayne Lansdowne
waynel at appliedi.net
Thu Dec 27 14:21:12 EST 2007
Thank you to everyone who responded -
This was exactly what I was looking for.
Regards,
Wayne
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Jonathan
Brashear
Sent: Thursday, December 27, 2007 2:15 PM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] New to Juniper (re-try)
Show | compare
Network Engineer
> 214-981-1954 (office)
> 214-868-8567 (cell)
> jbrashear at hq.speakeasy.net
http://www.speakeasy.net
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Wayne
Lansdowne
Sent: Thursday, December 27, 2007 1:06 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] New to Juniper (re-try)
Hello all,
I apologize..my first posting attempt did not come through correctly.
I'm new to the Juniper routers having previously worked with Riverstone.
Within the Riverstone CLI I had the ability to preview all the pending
(non-committed) changes via a 'scratchpad' command. Does the Juniper
have a similar feature? I'm unable to find anything thus far to display
a list of yet to be committed changes. Thus far I'm simply doing a
'commit check' then 'commit' and hoping I had remembered to implement
all my changes. I'm basically looking for a way to review all the
pending changes before making that commit.
I've done some searching and have come up empty. Is there a CLI command
I'm missing?
Regards,
Wayne
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list