[j-nsp] Vpls-ldp signaling

[Junos Guy]

Thanks Jake.
Hope someone from Juniper can confirm this.

Regards,
Aditya.



On 2/27/07, Bourgeois, Jacob (Jake)** CTR ** <bourgeois at alcatel-lucent.com>
wrote:
>
> This seems like a doc bug, AKAIK, and per 7.6 docs, BGP is still used to
> signal VPLS on juniper platforms.
>
>
> http://www.juniper.net/techpubs/software/junos/junos76/swref76-hierarchy/htm
> l/rfc-list2.html#1213459
>
> draft-ietf-l2vpn-vpls-bgp is listed.
> draft-ietf-l2vpn-vpls-ldp is not listed.
>
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Junos Guy
> Sent: Monday, February 26, 2007 8:41 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Vpls-ldp signaling
>
> Hello ,
>
> How do we configure vpls with ldp signaling ?
>
>
>
> As per JunOS 7.6 Feature Release.
>
> LDP Signaling for VPLS
> Uses Label Distribution Protocol (LDP) instead of Border Gateway Protocol
> (BGP) as the signaling protocol for VPLS
> Implemented per draft-ietf-l2vpn-ldp-05
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>