[j-nsp] ERX inter-VR links

[Andy Lamontagne]

Yes, but you must physically leave the router.  You can easilly do
this with a small switch and vlans on the 1 physical ERX intf on diff
VRs..


On 2/28/07, phil colbourn <phil.colbourn at railcorp.nsw.gov.au> wrote:
> Is it possible to establish links between VRs? For example to simulate a
> network of routers.
>
>
>
> This e-mail and any attachments may contain confidential information that is
> intended solely for the use of the intended recipient and may be subject to
> copyright. If you receive this e-mail in error, please notify the sender
> immediately and delete the e-mail and its attachments from your system. You
> must not disclose, copy or use any part of this e-mail if you are not the
> intended recipient. Any opinion expressed in this e-mail and any attachments
> is not an opinion of RailCorp unless stated or apparent from its content.
> RailCorp is not responsible for any unauthorised alterations to this e-mail
> or any attachments. RailCorp will not incur any liability resulting directly
> or indirectly as a result of the recipient accessing any of the attached
> files that may contain a virus.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>