[j-nsp] OC12 PIC

[Josh L. Richesin]

I have a bunch of t1's ds3's and oc3's hanging off of this interface.
Is there a command that would show me which ones might be down?

Thanks,
Josh 


-----Original Message-----
From: Jared Gull [mailto:jmgull at yahoo.com] 
Sent: Tuesday, January 23, 2007 9:33 AM
To: Josh L. Richesin; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] OC12 PIC

Josh,

What is the current state of the interface (i.e. show interface so-x/y/z
extensive)? If the PIC is operational and the circuit is up it should be
green.

-Regards,

Jared
--- "Josh L. Richesin" <jlrichesin at newqc.com> wrote:

> Hello,
> I have a Juniper m10i and I just notcied that the status light on the 
> pic is amber.  Is this normal?  I don't remember it being amber.  I 
> did a show system alarms and didn't see any alarms.
> 
> Thanks,
> Josh
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 



 
________________________________________________________________________
____________
Get your own web address.  
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL