[j-nsp] OC12 PIC

[Erdem Sener]

will something like " show interfaces terse | match -0/1/ | match
down" work for you ?

(assuming that the PIC is in FPC0/Slot1

On 1/23/07, Josh L. Richesin <jlrichesin at newqc.com> wrote:
> I have a bunch of t1's ds3's and oc3's hanging off of this interface.
> Is there a command that would show me which ones might be down?
>
> Thanks,
> Josh
>
>
> -----Original Message-----
> From: Jared Gull [mailto:jmgull at yahoo.com]
> Sent: Tuesday, January 23, 2007 9:33 AM
> To: Josh L. Richesin; juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] OC12 PIC
>
> Josh,
>
> What is the current state of the interface (i.e. show interface so-x/y/z
> extensive)? If the PIC is operational and the circuit is up it should be
> green.
>
> -Regards,
>
> Jared
> --- "Josh L. Richesin" <jlrichesin at newqc.com> wrote:
>
> > Hello,
> > I have a Juniper m10i and I just notcied that the status light on the
> > pic is amber.  Is this normal?  I don't remember it being amber.  I
> > did a show system alarms and didn't see any alarms.
> >
> > Thanks,
> > Josh
> >
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
>
>
>
> ________________________________________________________________________
> ____________
> Get your own web address.
> Have a HUGE year through Yahoo! Small Business.
> http://smallbusiness.yahoo.com/domains/?p=BESTDEAL
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Erdem