[j-nsp] [Fwd: How to upgrade from Junos4.01]

Juan C. Crespo R. jcrespo at ifxnw.com.ve
Thu Jan 25 08:37:13 EST 2007


Hi

    I'm getting started with one M20, and I'm trying upgrade from the 
Junos 4.0R1 to 7, but it fail, because the file system is full?? but 
how?? the HD have 8Gb of size?? Any Idea?¿?

Thanks

root> show system storage
Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
/dev/wd0s1a     64639    36398    23070    61%    /
mfs:35         762991        1   701951     0%    /tmp
/dev/wd0s1e      9247        3     8505     0%    /config
procfs              4        4        0   100%    /proc
/dev/wd1s1f   7172180     3008  6595398     0%    /var


root> show system boot-messages
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1996-2000 Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.

JUNOS 4.0R1.2 #0: 2000-03-26 06:06:14 UTC
    
tlim at single.juniper.net:/k/build/4.0R1.2/release_kernel/sys/compile/GENERIC
CPU: Pentium Pro (331.71-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66a  Stepping=10
  
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,<
16>,<b17>,MMX,<b24>>
Teknor CPU Card Recognized
real memory  = 805306368 (786432K bytes)
avail memory = 786247680 (767820K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7192 subclass=0)> rev 3 
class 600
0 on pci0:0:0
chip1 <Intel 82371AB PCI-ISA bridge> rev 2 class 60100 on pci0:7:0
chip2 <Intel 82371AB IDE interface> rev 1 class 10180 on pci0:7:1
chip3 <Intel 82371AB USB interface> rev 1 class c0300 int d irq 11 on 
pci0:7:2
smb0 <Intel 82371AB SMB controller> rev 2 class 68000 on pci0:7:3
pcic0 <TI PCI-1251 PCI-CardBus Bridge> rev 0 class 60700 int a irq 15 on 
pci0:1
:0
TI1251 PCI Config Reg: [pci only]
pcic1 <TI PCI-1251 PCI-CardBus Bridge> rev 0 class 60700 int b irq 7 on 
pci0:13
1
TI1251 PCI Config Reg: [pci only]
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 8 class 20000 int a 
irq 7 on
pci0:16:0
chip4 <generic PCI bridge (vendor=1011 device=0022 subclass=4)> rev 4 
class 604
0 on pci0:17:0
fxp1 <Intel EtherExpress Pro 10/100B Ethernet> rev 8 class 20000 int a 
irq 10 o
 pci0:19:0
Probing for devices on PCI bus 1:
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: EGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x300
ed1 not found at 0x280
ed2 not found at 0x340
psm0 not found at 0x60
sio0 at 0x3f8-0x3ff irq 4 flags 0x20010 on isa
sio0: type 16550A, console
sio1 at 0x3e8-0x3ef irq 5 flags 0x20000 on isa
sio1: type 16550A
sio2 at 0x2f8-0x2ff irq 3 flags 0x20000 on isa
sio2: type 16550A
pcic0 at 0x3e0-0x3e1 on isa
PC-Card ctlr(0) Intel 82365DF (5 mem & 2 I/O windows)
pcic0: slot 0 controller I/O address 0x3e0
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 not found at 0x3f0
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SanDisk SDCFB-96>, single-sector-i/o
wd0: 91MB (187904 sectors), 734 cyls, 8 heads, 32 S/T, 512 B/S
wdc0: unit 1 (wd1): <IBM-DARA-212000>
wd1: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
wdc2 not found at 0x180
ep0 not found at 0x300
fxp0: Ethernet address 00:a0:a5:12:16:b0
fxp1: Ethernet address 00:a0:a5:12:16:af
swapon: adding /dev/wd1s1b as swap device
Automatic reboot in progress...
/dev/rwd0s1a: clean, 28240 free (32 frags, 3526 blocks, 0.0% fragmentation)
/dev/rwd0s1e: clean, 9244 free (12 frags, 1154 blocks, 0.1% fragmentation)
/dev/rwd0s1a: clean, 28240 free (32 frags, 3526 blocks, 0.0% fragmentation)
/dev/rwd1s1f: clean, 7169210 free (314 frags, 896112 blocks, 0.0% 
fragmentation


root> ...prompt at x.x.x.x/jbundle-7.0R2.7.tgz /var/tmp/jbundle-7.0R2.7
Password for aaaa at x.x.x.x:
Receiving /root/...transferring.file.........Hto327 (64037170 bytes): 39%
/: write failed, file system is full
fetch: /root/...transferring.file.........Hto327: No space left on device
copy: fetch failed for ftp://a.a.a.a:prompt@x.x.x.x/jbundle-7.0R2.7.tgz


root> show version
Hostname:
Model: m20
JUNOS base [4.0R1.2] (Export restricted edition)
JUNOS Kernel Software Suite [4.0R1.2]
JUNOS Routing Software Suite [4.0R1.2]
JUNOS Packet Forwarding Engine Support [4.0R1.2]
JUNOS Online Documentation Files [4.0R1.2]
KERNEL 4.0R1.2 #0 built by tlim on 2000-03-26 06:06:14 UTC
MGD release 4.0R1.2 built by tlim on 2000-03-26 07:00:52 UTC
CLI release 4.0R1.2 built by tlim on 2000-03-26 07:01:01 UTC
CHASSISD release 4.0R1.2 built by tlim on 2000-03-26 06:10:59 UTC
DCD release 4.0R1.2 built by tlim on 2000-03-26 06:06:32 UTC
RPD release 4.0R1.2 built by tlim on 2000-03-26 06:55:08 UTC
SNMPD release 4.0R1.2 built by tlim on 2000-03-26 06:08:05 UTC
MIB2D release 4.0R1.2 built by tlim on 2000-03-26 06:08:22 UTC
APSD release 4.0R1.2 built by tlim on 2000-03-26 06:10:06 UTC
VRRPD release 4.0R1.2 built by tlim on 2000-03-26 06:10:16 UTC
ALARMD release 4.0R1.2 built by tlim on 2000-03-26 06:10:44 UTC
PFED release 4.0R1.2 built by tlim on 2000-03-26 06:12:05 UTC
CRAFTD release 4.0R1.2 built by tlim on 2000-03-26 06:11:51 UTC
SAMPLED release 4.0R1.2 built by tlim on 2000-03-26 06:12:35 UTC
jkernel-dd release 4.0R1.2 built by tlim on 2000-03-26 05:59:28 UTC
jroute-dd release 4.0R1.2 built by tlim on 2000-03-26 06:52:59 UTC



-- 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jcrespo.vcf
Type: text/x-vcard
Size: 254 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/juniper-nsp/attachments/20070125/abf8ec52/attachment-0001.vcf 


More information about the juniper-nsp mailing list