[j-nsp] OSPF Default Route

[Nitin Vazirani]

Hi! All,

An OSPF default route-problem:

The default route is visible in the routing-instance,
but is not getting installed in the route table ...
the output is as follows:

nitinv at GGSNMUM2_RE0> show ospf database instance
corpdelhi_VRF

    OSPF link state database, Area 0.0.0.1
 Type       ID               Adv Rtr           Seq    
 Age  Opt  Cksum  Len
Router   10.11.232.17     10.11.232.17     0x80000026 
1307  0x2  0x9436  48
Router  *10.11.232.18     10.11.232.18     0x80000030 
1075  0x22 0xa8f4  48
Network *10.11.232.22     10.11.232.18     0x80000011 
 140  0x22 0x43a6  32
    OSPF AS SCOPE link state database
 Type       ID               Adv Rtr           Seq    
 Age  Opt  Cksum  Len
Extern   0.0.0.0          10.11.232.17     0x80000003 
1306  0x82 0xf70   36


nitinv at GGSNMUM2_RE0> show route table corpdelhi_VRF

corpdelhi_VRF.inet.0: 5 destinations, 5 routes (5
active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

10.11.232.16/30    *[Direct/0] 17:37:40
                    > via ge-2/3/0.304
10.11.232.18/32    *[Local/0] 17:37:40
                      Local via ge-2/3/0.304
10.11.232.20/30    *[Direct/0] 17:37:40
                    > via ge-3/3/0.305
10.11.232.22/32    *[Local/0] 17:37:40
                      Local via ge-3/3/0.305
224.0.0.5/32       *[OSPF/10] 17:37:41, metric 1
                      MultiRecv

Could you please help if you've had a similar
experience.

Thank You,
Nitin Vazirani
Hutch, India



		
__________________________________________________________
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/