[j-nsp] JNCIP - LAB interface query with olives

[IanK]

Please ignore I was not using vlan-tagging correctly 

Working config now:

lab at r4# show 
description "Link to R3";
vlan-tagging;
unit 100 {
    vlan-id 100;
    family inet {
        address 10.0.2.6/30;
    }
}

Many thanks
IanK


-----Original Message-----
From: Shawn Hargan [mailto:shawnh at frii.com] 
Sent: 16 July 2007 16:00
To: ian.kruger
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] JNCIP - LAB interface query with olives

What do you get if you run "show interface fxp3.100"?
-SH

ian.kruger wrote:
> Hi All
>
>  
>
> I have created my lab and am experiencing something quite strange ,on some
> of the Olives I am only able to create a logical unit 0 , any other unit
> just doesn't appear to go "live" , the config is applied successfully but
I
> cant see the units if I execute a "show interface terse" ( or use them )
>
>  
>
> Working config :
>
>  
>
> fxp3 {
>
>     description "Link to R4";
>
>     unit 0 {
>
>         family inet {
>
>             address 10.0.2.5/30;
>
>         }
>
>     }               
>
>  
>
>  
>
> Lab at r3# run show interfaces terse 
>
> Interface               Admin Link Proto Local                 Remote
>
> dsc                     up    up  
>
> fxp0                    down  up  
>
> fxp0.0                  up    down inet  10.0.2.14/30    
>
> fxp1                    up    down
>
> fxp2                    up    up  
>
> fxp2.0                  up    up   inet  10.0.2.2/30     
>
> fxp3                    up    up  
>
> fxp3.0                  up    up   inet  10.0.2.5/30     
>
> fxp4                    up    up  
>
> fxp4.0                  up    up   inet  10.0.4.1/30     
>
>  
>
> NON-Working:
>
>  
>
> fxp3 {
>
>     description "Link to R4";
>
>     unit 100 {
>
>         family inet {
>
>             address 10.0.2.5/30;
>
>         }
>
>     }               
>
>  
>
>  
>
> Lab at r3# run show interfaces terse 
>
> Interface               Admin Link Proto Local                 Remote
>
> dsc                     up    up  
>
> fxp0                    down  up  
>
> fxp0.0                  up    down inet  10.0.2.14/30    
>
> fxp1                    up    down
>
> fxp2                    up    up  
>
> fxp2.0                  up    up   inet  10.0.2.2/30     
>
> fxp3                    up    up  
>
> fxp4                    up    up  
>
> fxp4.0                  up    up   inet  10.0.4.1/30     
>
>  
>
>  
>
> FYI - I am using JUNOS [7.2R1.7] 
>
>  
>
> My next test will probably be to upgrade to a newer version of Junos , but
> was wondering if anyone had seen anything similar 
>
>  
>
> Kind Regards
>
> IanK
>
>  
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>