[j-nsp] JNCIP - LAB interface query with olives

[Gabriel]

On the same note, we have experimented with VLAN tagging with Olives
here as well and noticed that we are unable to get an MTU of 1500. The
Olive automaticaly reduces the MTU to something lower (forgot the exact
number). Is there anything that can be done about that?

-Gabriel

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of IanK
> Sent: Monday, July 16, 2007 11:08 AM
> To: 'Shawn Hargan'
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] JNCIP - LAB interface query with olives
> 
> Please ignore I was not using vlan-tagging correctly 
> 
> Working config now:
> 
> lab at r4# show 
> description "Link to R3";
> vlan-tagging;
> unit 100 {
>     vlan-id 100;
>     family inet {
>         address 10.0.2.6/30;
>     }
> }
> 
> Many thanks
> IanK
> 
> 
> -----Original Message-----
> From: Shawn Hargan [mailto:shawnh at frii.com] 
> Sent: 16 July 2007 16:00
> To: ian.kruger
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] JNCIP - LAB interface query with olives
> 
> What do you get if you run "show interface fxp3.100"?
> -SH
> 
> ian.kruger wrote:
> > Hi All
> >
> >  
> >
> > I have created my lab and am experiencing something quite 
> strange ,on some
> > of the Olives I am only able to create a logical unit 0 , 
> any other unit
> > just doesn't appear to go "live" , the config is applied 
> successfully but
> I
> > cant see the units if I execute a "show interface terse" ( 
> or use them )
> >
> >  
> >
> > Working config :
> >
> >  
> >
> > fxp3 {
> >
> >     description "Link to R4";
> >
> >     unit 0 {
> >
> >         family inet {
> >
> >             address 10.0.2.5/30;
> >
> >         }
> >
> >     }               
> >
> >  
> >
> >  
> >
> > Lab at r3# run show interfaces terse 
> >
> > Interface               Admin Link Proto Local              
>    Remote
> >
> > dsc                     up    up  
> >
> > fxp0                    down  up  
> >
> > fxp0.0                  up    down inet  10.0.2.14/30    
> >
> > fxp1                    up    down
> >
> > fxp2                    up    up  
> >
> > fxp2.0                  up    up   inet  10.0.2.2/30     
> >
> > fxp3                    up    up  
> >
> > fxp3.0                  up    up   inet  10.0.2.5/30     
> >
> > fxp4                    up    up  
> >
> > fxp4.0                  up    up   inet  10.0.4.1/30     
> >
> >  
> >
> > NON-Working:
> >
> >  
> >
> > fxp3 {
> >
> >     description "Link to R4";
> >
> >     unit 100 {
> >
> >         family inet {
> >
> >             address 10.0.2.5/30;
> >
> >         }
> >
> >     }               
> >
> >  
> >
> >  
> >
> > Lab at r3# run show interfaces terse 
> >
> > Interface               Admin Link Proto Local              
>    Remote
> >
> > dsc                     up    up  
> >
> > fxp0                    down  up  
> >
> > fxp0.0                  up    down inet  10.0.2.14/30    
> >
> > fxp1                    up    down
> >
> > fxp2                    up    up  
> >
> > fxp2.0                  up    up   inet  10.0.2.2/30     
> >
> > fxp3                    up    up  
> >
> > fxp4                    up    up  
> >
> > fxp4.0                  up    up   inet  10.0.4.1/30     
> >
> >  
> >
> >  
> >
> > FYI - I am using JUNOS [7.2R1.7] 
> >
> >  
> >
> > My next test will probably be to upgrade to a newer version 
> of Junos , but
> > was wondering if anyone had seen anything similar 
> >
> >  
> >
> > Kind Regards
> >
> > IanK
> >
> >  
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> >   
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>