[j-nsp] 10 GE interface counter

[Daniel Lete]

Hello Xinyu,
You will find that information in the MIB definition of the entry you are 
looking for.

If you are referring to interface counters generically, the file
mib-jnx-if-extensions
is probably the place to look. It will tell you whether it is Counter32, 
Counter64, out of it you can figure out the max value (2 to the power of x)

Daniel





xinyu zeng wrote:
> Hi All,
> 
> What is the max number counter can support? Like on 10GE interface, how long
> the counter will overflow?
> 
> Best Regards,
> Zeng, Xinyu
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 

-- 
Daniel Lete Murugarren
HEAnet Limited, Ireland's Education and Research Network
1st Floor, 5 George's Dock, IFSC, Dublin 1
Registered in Ireland, no 275301  tel: +353-1-660 9040  fax: +353-1-660 3666
web: http://www.heanet.ie/