[j-nsp] BGP VPLS support

[Erdem Sener]

Hey,

 You need to use eighter vrf-table-label in the routing instance, or
configure a vt- interface with family inet and mpls (no addresses) and
put it in the instance to have your 'direct' route(s) installed in
your mpls cloud.

 Please note that you'll need a services pic for vt- interface.

 Cheers,
 Erdem

On 6/18/07, Leigh Porter <leigh.porter at ukbroadband.com> wrote:
> Hey folks,
>
> When using MPLS on JUNOS a directly connected interface route on a PE
> router is only assigned a label if there is a route on the PE router
> that uses this interface (static or OSPF or BGP). When a route is
> present that uses this interface then a label is assigned and the route
> makes it into bgp.l3vpn.0
>
> Is there a way of changing this behavior? I would like to plug some
> servers directly into a PE router routing-instance and have then
> reachable, but the interface routes do not make it to the l3vpn table,
> even if I explicitly ask them to be with a policy.
>
> Thanks, folks,
> Leigh Porter
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>