[j-nsp] j2300 cf upgrade

Jonathan Looney jonlooney at gmail.com
Wed Jun 20 15:01:28 EDT 2007


Michael,

>From the output of your snapshot, it appears you are using a flash drive
>256MB.

The JUNOS software only supports a limited number of USB flash devices, as
indicated in the list of Supported Third-Party Hardware in the J-series
Services Router Release Notes.  I believe other devices are not guaranteed
to work.  In particular, for booting purposes, it is important that the BIOS
support the device.

If you're not using one of the devices on the list, you should try doing
that.

-Jon

On 6/20/07, Michael Long <mlong at mikesoffice.org> wrote:
>
> Stacy W. Smith wrote:
> > Mike,
> >
> > Try leaving off the "as-primary" keyword when doing the snapshot to the
> > USB.
> >
> > The "as-primary" keyword is only necessary if the destination of your
> > snapshot will be used in the primary CF slot. So, don't use it when
> > doing the snapshot to the USB device, but once you're booted off the USB
> > with the new blank CF installed, you'll then want to do "request system
> > snapshot media compact-flash partition as-primary" to get JUNOS onto the
> > new primary CF.
>
> ok I did that but still no go
>
> mlong at snoopy> request system snapshot media usb partition
> Clearing current label...
> Partitioning usb media (da0) ...
> Partitions on snapshot:
>
>    Partition  Mountpoint  Size    Snapshot argument
>        a      /           374MB   root-size
>        b      swap        64MB    swap-size
>        e      /config     49MB    config-size
> Running newfs (374MB) on usb media / partition (da0s1a)...
> Running newfs (49MB) on usb media /config partition (da0s1e)...
> Copying '/dev/ad0s1a' to '/dev/da0s1a' .. (this may take a few minutes)
> Copying '/dev/ad0s1e' to '/dev/da0s1e' .. (this may take a few minutes)
> The following filesystems were archived: / /config
>
> Trying to boot from USB device ...
> Missing operating system
>
> >
> > Also, can you tell me what version of JUNOS you're using?
>
>
> mlong at snoopy> show version
> Hostname: snoopy
> Model: j2300
> JUNOS Software Release [7.6R1.9]
>
> I'm still doing something wrong I guess...
>
> Mike
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list