[j-nsp] MPLS VPN LAYER 3 translation from cisco to M20

[Erdem Sener]

Hi Juan,

 Did you try with I2J tool on Juniper website with whole config?

https://i2j.juniper.net/release/index.jsp  (you'll need to be a
registered customer)

 If you provide more snippets of configuration (like interfaces
belonging to VRF, your bgp import/export policies) I'll try to help
more.

Cheers,

On 3/5/07, Juan C. Crespo R. <jcrespo at ifxnw.com.ve> wrote:
> Dears
>
>     Anyone could help me translating this config from a Cisco to a
> Juniper M20?
>
> STATIC ROUTE
> ip route X.X.X.X 255.255.255.252 Serial0 name L3VPN
>
>
> ip vrf L3VPN
>  rd ASASA:000000001
>  route-target export ASASA:000000001
>  route-target import ASASA:000000002
>
>
> address-family vpnv4
> neighbor a.b.c.d peer-group iBGP-GROUP
>
> address-family ipv4 vrf L3VPN
> redistribute connected
> redistribute static
> no auto-summary
> no synchronization
> exit-address-family
>
> Thanks
>
> JC
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>