[j-nsp] Aggregate link on T640

[andre.pronk]

I have a question;
I want to bring two TenGig interfaces to a Aggregated link.
I have one link with units '"(vlan) on it and one new link.
the aggregated link will be ae1 interface.
Can some one tell me how to configure this.Juniper T640 with TenGig PIC
set interfaces ge-1/0/0 description "Original link"
set interfaces ge-1/0/0 traceoptions flag event
set interfaces ge-1/0/0 traps
set interfaces ge-1/0/0 vlan-tagging
set interfaces ge-1/0/0 unit 100 vlan-id 100
set interfaces ge-1/0/0 unit 100 family inet address xx.xx.xx.xx/xx
set interfaces ge-1/0/0 unit 101 description "Vlan 55"
set interfaces ge-1/0/0 unit 101 vlan-id 101
set interfaces ge-1/0/0 unit 101 family inet no-redirects
set interfaces ge-1/0/0 unit 101 family inet address xx.xx.xx.xx/xx
set interfaces ge-1/0/0 unit 102 description "VLAN 102"
set interfaces ge-1/0/0 unit 102 vlan-id 102
set interfaces ge-1/0/0 unit 102 family inet no-redirects
set interfaces ge-1/0/0 unit 102 family inet filter input internet-in
set interfaces ge-1/0/0 unit 102 family inet filter output internet-out
set interfaces ge-1/0/0 unit 102 family inet address xx.xx.xx.xx/xx

set interfaces ge-1/2/0 description "New Link"