[j-nsp] BGP load balancing on 2 links (same ISP)

[Piotr Marecki]

Hi Kana,

On j-boxes you need the same - there is nothing special about it - so

- be sure you have your statics in routing-options
- use multihop in group/neighbor stanza
- use local-address in group/neighbor

regards

piotr marecki

----- Original Message ----- 
From: "Kanagaraj Krishna" <kanagaraj at aims.com.my>
To: <juniper-nsp at puck.nether.net>
Sent: Friday, March 16, 2007 2:10 PM
Subject: Re: [j-nsp] BGP load balancing on 2 links (same ISP)


> Hi,
>   Which is the best way to get BGP load balancing up and running with the 
> same provider on a m7i using loopback IP? I've realised quite a number 
> enquiries on this matter on most forum. Can it be done? In cisco usually 
> the things needed are:
>
> - 2 static routes pointing to the providers loopback IP
> - ebgp multihop config
> - update source loopback
>
> Regards,
> Kana
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp