[j-nsp] Copnfiguring routing instance over a specific lsp

Yilmaz POLAT ypolat at teletek.net
Mon Mar 19 03:16:30 EST 2007


Hi all,

I have tried to route a routing instance over a specific lsp than
others. Triying policy based routing failed.. Below I found a topic on
forum belongs to the same issue, but it didn`t work. 

Is there anybody succeed on this issue, and can share solution with me..

Thanks in advance,

Yilmaz

term 1 {
    from community A;
    then {
        install-nexthop lsp LSPforA;
        accept;
    }
term last {
    from community else;
    then {
        install-nexthop lsp LSPforelse;
        accept;
    }

community A members target:1:1;
community else members target:*:*;


routing-options {
    forwarding-table {
        export TEST_POLICY;
    }
}


Yasal Uyari:
Bu e-posta'nin icerdigi bilgiler (ekleri de dahil olmak uzere) gizlidir. Teletek Telekomunikasyon Hizmetleri A.S. onayi olmaksizin icerigi kopyalanamaz, ucuncu kisilere aciklanamaz veya iletilemez . Bu mesajin gonderilmek istendigi kisi degilseniz (ya da bu e-posta'yi yanlislikla aldiysaniz), lutfen yollayan kisiyi haberdar ediniz ve mesaji sisteminizden derhal siliniz. Teletek bu mesajin icerdigi bilgilerin dogrulugu veya eksiksiz oldugu konusunda bir garanti vermemektedir. Bu nedenle bilgilerin ne sekilde olursa olsun iceriginden, iletilmesinden, alinmasindan, saklanmasindan sorumlu degildir. Bu mesajin icerigi yazarina ait olup, Teletek'in goruslerini icermeyebilir.Disclaimer:
This e-mail (including any attachments) may contain confidential and/or privileged information. Copying, disclosure or distribution of the material in this e-mail without Teletek Telekomunikasyon Hizmetleri A.S.'s authority is strictly forbidden. If you are not the intended recipient (or have received this e-mail in error), please notify the sender and delete it from your system immediately. Teletek makes no warranty as to the accuracy or completeness of any information contained in this message and hereby excludes any liability of any kind for the information contained therein or for the information transmission, reception, storage or use of such in any way whatsoever. Any opinions expressed in this message are those of the author and may not necessarily reflect the opinions of Teletek.




More information about the juniper-nsp mailing list