[j-nsp] aggregate link problem between juniper T640 and cisco6509

[Jeff Tantsura]

Hi Andre,

It would be no different than configuring trunk on ethernet interface ie

ae0 
vlan-tagging;
        
unit x {
  vlan-id x;
        }
unit y {
  vlan-id y;
}

Regards,
Jeff
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of andre.pronk at kpn.com
> Sent: vrijdag 16 maart 2007 17:11
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] aggregate link problem between juniper T640 and cisco6509
> 
> The next problem that i have is that when i configure port-channel on a
> cisco6509
> with two TenGig interfaces.I have to configure the channel group mode
> active when i
> make this connection to a juniper T640.And LAPC on on the juniper
> 
> The problem that occur is that the aggregate link on the juniper exist
> with some unit's (vlans) and is not a routed link.
> 
> can someone tell me what he configuration coould be when you
> want to create a aggregate link between a ciso and a juniper
> on a trunk line
> 
> The aggregate link will not come online.
> 
> 
> greetings andre
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp