[j-nsp] GRE Tunnel on J-4350

[Joe Horton]

    gr-0/0/0 {
        unit 1 {
            tunnel {
                source y.y.y.y;
                destination x.x.x.x;
            }
            family inet {
                address 10.1.10.2/30;
            }
        }



Joe Horton
972-663-3010
mailto://jhorton@juniper.net 
 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Bill Sandiford
Sent: Sunday, March 25, 2007 12:23 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] GRE Tunnel on J-4350

Hello All:

I'm very new to JunOS having worked exclusively with Cisco for over 12
years.  Our organization has just purchased our first Juniper product, a
J4350.

I'm trying to figure out how to setup simple GRE tunnels on the J4350
similar to the Cisco's version below.

interface Tunnel1
 description Tunnel to Oshawa office
 ip address 10.1.10.1 255.255.255.252
 tunnel source x.x.x.x
 tunnel destination y.y.y.y
!

In fact, I have to configure the J4350 to bring up a tunnel to a Cisco that
is configure just like above.  I have searched the docs that I have and
online for this, but I haven't been able to find it.  I find lots for IPSEC,
but I'm not looking for that.  I just need a simple GRE tunnel.

Any help would be greatly appreciated.

Regards,
Bill
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp